PocketWizard FlexTT5-Canon - Camera (overig)

Geen reviews beschikbaar Schrijf een review

Prijzen

  • Op werkdagen voor 23:59 besteld, de volgende dag in huis!
  • Kom ook eens langs in één van onze 9 winkels!
€ 119,00 Gratis verzending
  • Voor 16:00u besteld, volgende werkdag gratis bezorgd
€ 119,00 Gratis verzending
Marketplace
  • Besteld voor: 14:00 geleverd in: 1dag(en)
  • Gratis verzending vanaf € 20,- | 30 Dagen Bedenktijd
€ 119,00 Gratis verzending
Login of registreer om de complete prijshistorie voor dit product te zien.
Prijshistorie inzien?

Login of registreer om de complete prijshistorie voor dit product te zien.

Registreren Inloggen

Reviews

We hebben voor dit product nog geen reviews

Help anderen en geef jouw mening over dit product. We verloten iedere maand onder alle reviewers 2 x € 250,-.

Schrijf een review

Specificaties

Algemeen

EAN
0893577001545, 5269692849785, 0033172409074
Partnumber
PW FLEXI-C, 100452, FlexTT5 For Canon
Toelichting partnumber
-
Releasedatum
May 2011
Introductie model
2014
Op Kieskeurig sinds
March 2014
Type/soort
camera toebehoren
Fabrikant kleur(en)
zwart

Algemene kenmerken

Kleur(en)
zwart

Inhoud en afmetingen

Hoogte
3.60 cm
Breedte
7.30 cm
Gewicht (gram)
108 gram
Breedte (mm)
73 mm
Hoogte (mm)
36 mm

Aansluitingen

Compatibiliteit
Canon

Toelichting specificaties

TTL Compatibility Canon E-TTL II\n\n- ControlTL: PocketWizard’s newest firmware platform taps into the camera’s digital communications to enable an entirely new level of remote flash capability through our proven radio system. ControlTL allows remote TTL for Canon E-TTL II systems as well as Manual Power Control. ControlTL firmware is configurable and upgradeable for “future-proof” continuous improvement. Find more details on ControlTL here.\n\n- Dedicated E-TTL II Triggering: Locking your MiniTTI Transmitter into the hot shoe of a Canon DSLR camera and mounting E-TTL II flashes onto FlexTT5 Transceivers gives you full autoflash exposure control with the freedom and reliability of a PocketWizard radio. There are no special settings to make or modes to call up. Use the camera, on-camera flash or flash commander controls for flash compensation, zone and ratio control.\n\n- Manual Power Control: Adjust the manual power settings of your remote Canon Speedlites directly from a 580EX II flash mounted on your on-camera MiniTT1 or FlexTT5. Working with a Canon 580EX II in the shoe of the MiniTT1 or FlexTT5, you can independently control the power output of up to three groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting simply through the user interface on the back of the 580EX II. Now you can work with total control with your remote lights, without leaving your shooting position.\n\n- Zone Select: The FlexTT5 Transceiver has an A-B-C zone select switch to allow use with the remote groups/zones found on on the PocketWizard AC3 ZoneController or Canon flashes. Zones allow you to control single or groups of lights independently from other lights in different zones. These zones can also be used with a MuiltiMAX thus allowing you to pair a single MultiMAX radio on camera with FlexTT5's Transceivers on your remote flashes and utilize many of the MultiMAX's advance trigger functions.\n\n- HyperSync: HyperSync allows photographers to achieve faster X-sync speeds with full power flash. Now you can cut the ambient light and use wide-open apertures, outdoors in bright sunlight. That extra speed can also freeze action, whether shooting models or athletes in motion.\n\n- HyperSync works with both TTL speedlites and full size studio flash. All you need is a MiniTT1 or FlexTT5 on camera that has been tuned to your specific camera via the PocketWizard Utility. While performance varies by the camera and flash equipment being used, HyperSync will get the maximum possible out of any set-up.\n\n- Optimized High SpeedSync (HSS): When HyperSync can’t keep up, High Speed Sync takes over for Speedlite flash photography all the way to 1/8000. ControlTL optimizes this amazing feature and provides more light (which equals greater working distance), faster recycling times and more flashes per battery set when shooting in Canon's HSS/FP Flash mode. Use this feature to shoot wide open in bright sun for amazing results.\n\n- Click here to watch a detailed video on Optimized High Speed Sync as narrated by Photographer Mark Wallace.\n\n- Optimized Rear Curtain Sync: Precise rear curtain sync capability is engaged automatically, no buttons to press. Set the shutter speed at which rear curtain sync is engaged with the PocketWizard Utility. Capture natural light trails with sharp exposures at the end\n- – no “after trails!”\n\n- Pre-Flash Boost: In some E-TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see. With Pre-Flash Boost, the pre-flash is two stops brighter. This will approximately double the working distance of E-TTL II, compensating for the light loss when defusing or bouncing.\n\n- Power Tracking: When working with the PowerST4, PowerMC2 and AC9/FlexTT5 paired with compatible manual flashes, you can change any of your settings on your camera and the system adjusts for those changes. Change your flash exposure compensation to adjust the exposure or make adjustments in aperture or ISO and the system balances your flash for proper exposure.\n\n- Basic Trigger Mode: Allows the MiniTT1 or FlexTT5 to work as a transmitter on ANY camera it will fit. Anyone looking for the small form factor of the MiniTT1 can use it on other DSLR’s, SLR’s or even medium format cameras with standard hot shoes. The MiniTT1 and FlexTT5 are completely reverse compatible with all previous PocketWizards so they will work with whatever PocketWizards you already own.\n\n- PocketWizard Compatible: The FlexTT5 operates on the same channels as all other PocketWizards and will work with any unit you may already have.\n\n- PocketWizard Utility - Programmable and Upgradeable: Use the supplied PocketWizard Utility software with the on-board USB port to program the FlexTT5 to any PocketWizard channel and zone as well as many other custom settings. The FlexTT5 can be upgraded whenever updates and feature enhancements are available (many planned!).\n\n- Auto-Sensing Transceiver Technology: PocketWizard's Auto-Sensing Transceiver Technology enables the FlexTT5 Transceiver to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. All PocketWizard Transceivers default to Reciever mode. When a hot shoe or other trigger is detected, it automatically switches to Transmitter mode.\n\n- Auto-Relay Mode: Easily trigger a remote camera in sync with distant remote flashes with Auto-Relay Mode. Put a camera where you can't be and have remote TTL or non-TTL lighting at the same time. Expand your coverage and increase your creativity.\n\n- Channels / Learn Mode: The FlexTT5 has two channel configuration settings; C1 and C2. Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography or Manual Power Control, or 32 standard channels** for manual flash photography. Channels can be configured with the PocketWizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings.\n- 20 ControlTL channels for FCC/IC 344 MHz radios and\n- three ControlTL channels for CE 433 MHz radios.\n- 32 Standard channels for FCC/IC 344 MHz radios and\n- 35 Standard channels for CE 433 MHz radios.\n\n- Camera/Flash Ports: The FlexTT5 Transceiver has two plug-in ports for use with remote E-TTL II cameras and other flash units, including studio strobes. With its auto-relay function, the Flex can trigger a remote camera and transmit to a remote strobe.\n\n- Continuous Fast FPS: Never before have you been able to shoot remote E-TTL non-stop in continuous high-speed mode. Fill the buffer! Nothing else comes close.\n\n- Low-Profile Design: The FlexTT5 lies flat, stays out of the way and features a flip-up antenna for additional range when needed.\n\n- High Speed Sync (HSS or FP Sync) Disable Mode. Select either HSS Sync or HyperSync™ at shutter speeds at or over 1/640. This allows you to use HyperSync and the benefit of full power flash all the way up to 1/8000 with certain flash systems.\n\n- Auto Trigger Select for ControlTL: The hot shoe on both the MiniTT1 and Flex TT5 will trigger just about any hot shoe flash placed into it in addition to the Canon Speedlite’s it is designed for. Yes, you can now fire just about any hot shoe flash including Vivatar, Nikon, etc., in manual mode only and not TTL mode. (max trigger voltage < 50V, use P2 port for up to 200V)\n\n- Built-in Hot Shoe: Lock your Canon flash into the FlexTT5’s dedicated hot shoe and combine your remote flash with on-camera flash or use the on-camera flash for additional E-TTL II or Manual Power Control only. The metal and glass reinforced resin hot shoe assembly is a superstructure onto itself and incredibly durable. The best part; no more cords.\n\n- Continuous Remote Camera Triggering: This allows for triggering a continuous motor drive burst of a camera connected to the P1 port on a remote FlexTT5.\n\n- Transmit Only Mode: This prevents triggering of a flash mounted on a FlexTT5 to be used as a transmitter by other photographers in the area using PocketWizard radios.